Gough Plastics Logo

Gough Plastics

Caring for people and the planet with a passion

Extractor Hoods and Liners

World first and leader in the design and manufacture of harvester extractor hoods and liners. Proudly designed and manufactured in North Queensland for tough Australian conditions.

  • Made with tough polyethylene
  • Light-weight
  • UV-stabilised
  • Non-conductive
Youtube Extractor Hoods and Liners

1200 and 1300 Liners

1200/1300 Strip Liner 1300 Entry Liner STD

1200/1300 Strip Liner

Suits the 1200 or 1300 entry liner. Designed to protect and extend the life of the Entry Liner by protecting the high wear area, aiming for a full year of harvesting with one entry liner. This has been very successful since the 1997 harvesting season.

1300 Entry Liner STD

Suits the 1300 primary hood manufactured 1996 - 1997. This product has no seam lines. Where the exit liner would join, there is a piece cut out on either side at the bottom to allow the liner to fit into the primary hood.


1300 Exit Liner STD 1300 Entry Liner HD

1300 Exit Liner STD

Suits the 1300 primary hood manufactured 1996 - 1997. Used with the 1300 entry liner standard.

1300 Entry Liner HD

Made for the 1300 Conversion where the two liners are bolted together for a steel floor. Also available in black.


1300 Exit Liner HD

1300 Exit Liner HD

Made for the 1300 Conversion where the two liners are bolted together for a steel floor. Also available in black.

Cameco and Austoft

Cameco Cone Liner Cameco 5’ Primary Hood

Cameco Cone Liner

Measures 1500mm wide. Suits John Deere 3500 and 3510 models.

Cameco 5’ Primary Hood

Measures 1500mm wide. Suits John Deere 3500 and 3510 models.


Cameco 5’ Entry Liner Cameco 5’ Exit Liner

Cameco 5’ Entry Liner

Measures 1500mm wide. Suits John Deere 3500 and 3510 models.

Cameco 5’ Exit Liner

Measures 1500mm wide. Suits John Deere 3500 and 3510 models.


Austoft Cone Liner

Austoft Cone Liner

Suits Austoft 8010 and 8810 models.

GM900

GM900 Strip Liner GM900 Secondary Hood

GM900 Strip Liner

Suits the GM900 hood. Extends hood life by protecting the high wear area.

GM900 Secondary Hood

Fitted standard to Austoft 97/98. Supersedes the Original and the Shell secondaries. Suitable for all machines. Has the option of a strip liner. Gives best directional control and extraction. Also available in black.


Accessories

Upper Fairing Lower Fairing

Upper Fairing

Lower Fairing


4’ Nose Cone 4’ 6” Nose Cone

4’ Nose Cone

4’ 6” Nose Cone


Hood Liner Material

Available in two sizes:

4,750mm wide x 600mm high
2,365mm wide x 600mm high